FedEx Shipping International Calculator

Formatting only. This does not change the calculation.
Use your negotiated DIM factor. 0 uses the carrier default.
Your carrier rate for this lane. Required unless a rate provider is configured.
Carriers publish this weekly; enter the current figure for your lane.
Billable weight
8
Shipping Cost Calculator
Dimensional weight
1
Actual weight
8
Which weight is billed
actual
Dimensional divisor applied
5,000
Cubic size
2,160
Length plus girth
62
Density
231.215
NMFC freight class
50
Zone applied
9
Base transportation cost
0
How the transportation cost was reached
no rate supplied
Fuel surcharge
0
Total surcharges
0
Cost per piece
0
Total shipment cost
0
Where the rate came from
no rate supplied - weights only
Worked out from UPS Rate and Service Guide, dimensional weight calculation and 10 other sources.
No rate was supplied and no rate provider is configured, so only the weights and freight class are calculated. Carrier retail rates are proprietary and change frequently: enter your own rate for this lane, or connect a rate provider.

How this is worked out

4 steps
  1. Dimensional weight = 2160 / 5000 = 0.432, rounded up to 1 kg.
  2. Billable weight is the greater of the billed scale weight (8) and dimensional (1): 8 kg.
  3. Length plus girth = 18 + 2 x (12 + 10) = 62.
  4. Density 231.21 lb per cubic foot puts this in NMFC class 50.

Results are general information, not financial, tax, legal, medical or engineering advice.